Makita TW161D Instruction Manual
Hide thumbs
Also See for TW161D:
- Instruction manual (81 pages) ,
- Instruction manual (73 pages) ,
- Instruction manual (81 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita TW161D
Summary of Contents for Makita TW161D
- Page 1 INSTRUCTION MANUAL Cordless Impact Wrench TW161D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: TW161D Fastening capacities Standard bolt M8 - M16 High tensile bolt M6 - M12 Square drive 12.7 mm No load speed Hard impact mode 0 - 2,400 min Soft impact mode 0 - 1,300 min Impacts per minute... -
Page 3: Ec Declaration Of Conformity
Electrical Safety Vibration Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any The vibration total value (tri-axial vector sum) deter- adapter plugs with earthed (grounded) power mined according to EN62841-2-2: tools. Unmodified plugs and matching outlets will Work mode: impact tightening of fasteners of the maxi- reduce risk of electric shock. - Page 4 Do not let familiarity gained from frequent use Keep handles and grasping surfaces dry, of tools allow you to become complacent and clean and free from oil and grease. Slippery ignore tool safety principles. A careless action handles and grasping surfaces do not allow for can cause severe injury within a fraction of a safe handling and control of the tool in unexpected second.
- Page 5 MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious CAUTION: Only use genuine Makita batteries. personal injury. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting Important safety instructions for causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and battery cartridge charger.
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. CAUTION: The tool will automatically stop during operation if the Always be sure that the tool is tool and/or battery are placed under one of the following switched off and the battery cartridge is removed conditions: before adjusting or checking function on the tool. Overloaded: Installing or removing battery The tool is operated in a manner that causes it to draw an abnormally high current. - Page 7 Pull the switch trigger to turn on the lamp. To turn off, Switch action release it. The lamp goes out approximately 10 seconds after releasing the switch trigger. To keep the lamp off, turn off the lamp status. First pull and release the switch trigger. And then press the but- for one second within 10 seconds.
- Page 8 Changing the impact force You can change the impact force in three steps: hard, soft, and Reverse rotation auto stop mode. This allows a tightening suitable to the work. Every time the button is pressed, the number of blows changes in three steps. ► 1 . Hard 2. Soft 3. Reverse rotation auto stop mode 4.
- Page 9 For impact socket with O-ring and pin ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Selecting correct impact socket Always use the correct size impact socket for bolts and nuts. An incorrect size impact socket will result in inac- curate and inconsistent fastening torque and/or damage to the bolt or nut.
-
Page 10: Installing Hook
Proper fastening torque for standard bolt Installing hook N•m CAUTION: When installing the hook, always (kgf•cm) secure it with the screw firmly. If not, the hook may come off from the tool and result in the personal (1430) injury. (1224) (1020) (816) (612) (408) ► 1 . Groove 2. Hook 3. Screw (204) The hook is convenient for temporarily hanging the tool. -
Page 11: Optional Accessories
NOTE: Excessive fastening torque may damage the ACCESSORIES bolt/nut or impact socket. Before starting your job, always perform a test operation to determine the proper fastening time for your bolt or nut. CAUTION: These accessories or attachments NOTE: If the tool is operated continuously until the are recommended for use with your Makita tool battery cartridge has discharged, allow the tool to rest specified in this manual. The use of any other for 15 minutes before proceeding with a fresh battery accessories or attachments might present a risk of cartridge. injury to persons. Only use accessory or attachment for its stated purpose. The fastening torque is affected by a wide variety of factors including the following. After fastening, always... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885702-223 www.makita.com 20190110...