Canon EOS-1 DX Mark III Advanced User's Manual page 389

Movie recording
These descriptions apply to menus only available in movie recording.
[ 1]
Movie Servo AF
With this function enabled, the camera focuses on the subject continuously during movie
recording.
[Enable]
• The camera focuses on the subject continuously even when you are not pressing
the shutter button halfway.
• To keep the focus at a specific position, or if you prefer not to record mechanical
sounds from the lens, you can temporarily stop Movie Servo AF by tapping [
the lower left of the screen.
• Movie Servo AF stops when you press the button assigned to [Pause Movie Servo
AF] ( ) in [
button again.
• Movie Servo AF stops while you hold down the button assigned to [AF stop] (
Movie Servo AF resumes when you release the button.
• When Movie Servo AF is paused, if you return to movie recording after operations
such as pressing the <
Movie Servo AF will resume.
[Disable]
Press the shutter button halfway or press the <
6: Custom Controls]. Movie Servo AF resumes when you press the
> or < > button or changing the AF method,
> button to focus.
389
] in
).