GE GSC3500D55WW Owner's Manual page 12

Starting the dishwasher
Rinse Only
For rinsing partial loads that will be washed later. Do not use detergent.
1
Make sure HEATED DRY is not selected.
2
Be sure the door is unlatched.
Plate Warmer or Drying
For warming clean dishes and serving plates. This cycle will take approximately 39 minutes.
1
Load clean dishware to be warmed.
2
Select HEATED DRY ON.
3
Be sure the door is unlatched.
Hot Start or Hot Prestart Option
Preheats wash water.
1
Select the HOT START or HOT
PRESTART cycle and any other option
on the push button pad.
2
Be sure the door is unlatched.
Short Wash or Light Wash or Water Saver
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
1
Be sure the door is unlatched.
2
Slowly turn the Dial to SHORT WASH,
LIGHT WASH or WATER SAVER.
Start
Slowly turn the dial to the START or ON position, or the selected cycle. Don't turn it past the START, ON or cycle
position; you could accidentally miss a prewash.
There is a time delay between start-up and water fill so you will not hear any wash action right away.
Latch the door to begin the cycle.
12
3
Slowly turn the dial to RINSE ONLY.
4
Latch the door to start the cycle.
4
Slowly turn the dial to PLATE WARMER
or DRYING.
5
Latch the door to start the cycle.
3
Slowly turn the dial to HOT START or
HOT PRESTART.
4
Latch the door to start the cycle.
3
Latch the door to start the cycle.
49-55115