Table of Contents
Advertisement
Operating Instructions
Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
SIMULTANEOUSLY FOR 3 SECONDS
TO TURN UNIT OFF:
DO THIS:
PRESS
ON/OFF BUTTON
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
(2-WAY)
10
2
0
0
9
E
e l
t c
o r
ADDITIONAL THINGS YOU SHOULD KNOW
Air Directional Louvers
Air directional louvers control air flow direction. Your air conditioner has the louver
type described below.
2-Way air directional louvers
The 2-Way air directional louvers allow you to direct the air flow Left or Right
throughout the room as needed. To adjust the air directional louvers side-to-side,
use the center handle as you move it side-to-side.
u l
x
H
o
m
e
P
o r
d
u
t c
, s
n I
. c
YOU WILL SEE:
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
YOU WILL SEE:
Note: After the unit is turned off, the light on the display
will gradually fade away in 3 seconds. The unit will always
return to "eco" mode and "auto" fan speed setting when it
is turned on again.
l A
r l
g i
h
s t
r
s e
r e
e v
. d
Advertisement
Table of Contents
