Table of Contents
Advertisement
M1G055-BD91-26
2. INTENDED USE
The device is designed exclusively for use as a drive motor.
Any other usage above and beyond this does not conform with the
intended purpose and constitutes misuse of the device.
Customer equipment must be capable of withstanding the mechanical
and thermal stresses that can arise from this product. This applies for the
entire service life of the equipment in which this product is installed.
Intended use also includes
Use of the device in stationary systems only.
●
Performance of all maintenance work.
●
Using the device within the permitted ambient temperature range; see
●
Chapter 3.5 Transport and storage conditions and
Chapter 3.2 Nominal data.
Operating the device with all protective devices.
●
Following the operating instructions.
●
Improper use
In particular, operating the device in the following ways is prohibited and
could be hazardous:
Resonant operation, operation with severe vibration/oscillation. This
●
also includes vibration transmitted to the motor from the customer
installation.
Operation of the device in the camping area or similar applications.
●
Operation in medical equipment with a life-sustaining or life-support
●
function.
Conveying solids in the flow medium.
●
Painting the device
●
Connections (e.g. screws) coming loose during operation.
●
Conveying air that contains abrasive particles.
●
Conveying highly corrosive air, e.g. salt spray. Exception: devices
●
designed for salt spray and correspondingly protected.
Conveying air with high dust content, e.g. suctioning off sawdust.
●
Operating the device close to flammable materials or components.
●
Operating the device in an explosive atmosphere.
●
Using the device as a safety component or to perform safety-related
●
functions.
Operation with completely or partially disassembled or manipulated
●
protective devices.
In addition, all applications not listed among the intended uses.
●
Item no. 50356-5-9970 · ENU · Change 234164 · Approved 2021-08-11 · Page 3 / 10
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions
Advertisement
Table of Contents
