The subject is not focused properly.
•
The focus range varies depending on the Recording Mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
The recorded picture is blurred.
The Optical Image Stabiliser is not effective.
> The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures.
> When taking pictures at a slow shutter speed, use the self-timer.
Taking pictures using Auto Bracket is not possible.
•
Is there any memory remaining on the built-in memory or the card?
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [Auto] when the camera is shipped. Therefore, when taking pictures
indoors, etc. noise will appear.)
> Decrease the ISO sensitivity.
> Take pictures in bright places.
•
Have you set [High Sens.] in Scene Mode, or [Burst] in [Rec] menu to [
resolution of the recorded picture decreases slightly because of high sensitivity processing, but
this is not a malfunction.
The brightness or the hue of the recorded picture is different from the actual
scene.
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and colour. These are a result of the characteristics
of the light source and do not indicate a malfunction.
Others
(P81)
- 162 -
(P25)
(P22)
(P22)
(P78)
] or [
]? If so, the