Before The First Use - TECHWOOD TBC-226L Instruction Manual

• Before first use, remove the device and all accessories.
• Clean the apparatus according to the instructions in "Cleaning and
maintenance" paragraph.
• Place the machine on a suitable flat, stable surface.
• Remove the appliance from the packaging
• Remove all plastics and stickers (except the nameplate)
• Clean the exterior with a dry cloth.
• Read all instructions in this manual.
1. On / Off button
2. Temperature increase button
3. Temperature decrease button
4. 360 ° rotating cord
5. Brush pins
 Unroll the power cord completely.
 Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
 Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
 Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
 Never modify the appliance in anyway.
- Connect your smoothing brush
- Press and hold the power button for 3 seconds. The digital display lights up.
- Preheat your brush to a temperature of 230 ° C by pressing the "+" and "-"
buttons and let it warm for 2 minutes.

BEFORE THE FIRST USE

TO KNOW THE APPLIANCE
USE
USE ON DRY HAIR AND DEMELS
7