TECHWOOD TBC-891 Instruction Manual

TECHWOOD TBC-891 Instruction Manual

Styling blowing hot brush

Advertisement

Quick Links

TBC-891
STYLING BLOWING HOT BRUSH
INSTRUCTION MANUAL
Dear consumer, Please read these instructions carefully before use in
order to avoid damage due to incorrect use and to better understand the
functions of this product. Please pay particular attention to the safety
guide. If you pass the device on to a third party, these Operating
Instructions must also be handed over. Please keep them for future
references.
1

Advertisement

Table of Contents
loading

Summary of Contents for TECHWOOD TBC-891

  • Page 1 TBC-891 STYLING BLOWING HOT BRUSH INSTRUCTION MANUAL Dear consumer, Please read these instructions carefully before use in order to avoid damage due to incorrect use and to better understand the functions of this product. Please pay particular attention to the safety guide.
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS Please read these instructions carefully before use.  Keep present instructions for future references.  Check that your mains voltage corresponds to that stated on  the appliance. Only use the appliance for domestic purposes and household  or similar applications such as: -staff kitchen areas, in shops, offices and other working environments;...
  • Page 3 appliance in a safe way and understand the hazards involved. Cleaning and maintenance must not be made by children  without supervision. Keep the appliance and its cord out of reach of children aged  less than 8 years of age when it is energized or cooling down. This device is not a toy, do not leave small children or people ...
  • Page 4 Never wind the cord around the appliance and do not bend it  Ensure that the power cord does not come into contact with  hot parts of this unit. Make sure the appliance has cooled down before cleaning  and storing it.
  • Page 5: General Information

    WARNING FOR PARTICULAR PRODUCTS TO USE IN A BATHROOM To provide additional protection, in the electrical circuit supplying the bathroom, a residual current device (RCD) with a rated residual current not exceeding 30mA operation, is recommended. Consult your installer. NOTE: A thermal fuse, is not a residual current device (RCD). When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off...
  • Page 6 are guarantees of compliance with essential requirements. The symbol "RECYCLING" raise consumer awareness on the need to recycle its waste. Recycling is a process by which materials that compose a product in end of life (industrial or household waste) are reused in whole or part and will be returned to the initial production cycle.
  • Page 7: Assembling The Brush

     Unroll the power cord completely.  Check that the tension in force in the country where you are corresponds to that indicated on the apparatus.  Connect the apparatus in a correct socket-outlet, (and connected to the ground if the unit is Class I), to avoid any danger. ...
  • Page 8: Cleaning And Maintenance

    CLEANING AND MAINTENANCE  Before cleaning, Always : switch off the appliance, disconnect the apparatus and let it cool.  Clean the outside of the apparatus with a sponge or slightly wet linen.  Never plunge the apparatus in water or all other liquid ! ...
  • Page 9: Specifications

    webs etc) as well as cleaning, maintenance or it replacement of wearing parts are not guaranteed and are thus to pay ! In the event of foreign intervention, the guarantee becomes null and void. After flow of the warranty period, repairs can be carried out, against payment, by a specialized trade or a repair service.

Table of Contents