1. Manuals
  2. Brands
  3. Ritelite Manuals
  4. Portable Generator
  5. RITE-POWER 615
  6. Manual

Ritelite RITE-POWER 615 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
300W 110V / 230V
Product Resources
This manual covers the Rite-Power 615 with the following product codes:
SLK310BP2/300/230/AMF100/TE-F | SLK310BP2/300/230/AMF100/T60309
SLK310BP2/300/110/AMF100/T60309
The information contained in this manual is based on products manufactured up to the time of publication.
Ritelite (Systems) Ltd reserves the right to change any of this information without notice.
No part of this manual may be reproduced in any form or by any means, electronic or mechanical without express
written permission from Ritelite (Systems) Ltd.
Any type of reproduction or distribution not authorized by Ritelite (Systems) Ltd represents an infringement of valid
copyrights, and violators will be prosecuted. We expressly reserve the right to make technical modifications, even
without due notice, which aim at improving our products or their safety standards.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RITE-POWER 615 and is the answer not in the manual?

Questions and answers

Related Manuals for Ritelite RITE-POWER 615

Summary of Contents for Ritelite RITE-POWER 615

  • Page 1 No part of this manual may be reproduced in any form or by any means, electronic or mechanical without express written permission from Ritelite (Systems) Ltd. Any type of reproduction or distribution not authorized by Ritelite (Systems) Ltd represents an infringement of valid copyrights, and violators will be prosecuted. We expressly reserve the right to make technical modifications, even...
  • Page 2 Use this page to record important information about your RITE-POWER 615. UNIT PRODUCT REFERENCE UNIT SERIAL NUMBER This information can be found on your RITE-POWER 615 data plate which is found at the rear of the unit. NOTE: Below is an example of the RITE-POWER 615 data plate.

  • Page 3: Table Of Contents

    PAGE NUMBER Section 1: Introduction & applications for use Section 2 : Safety rules Section 3: Technical specifications Section 4: Setting up the RITE-POWER 615 Section 5: Operating instructions 5a) Pre-operation inspection 5b) Using the RITE-POWER 615 5c) Recharging the RITE-POWER 615...

  • Page 4: Section 1: Introduction & Applications For Use

    This Manual should always stay with the RITE-POWER 615. APPLICATIONS FOR USE The RITE-POWER 615 is designed for use in the following applications only. It should not be used for any other purpose. If in any doubt about applications for use, please contact either Ritelite (Systems) Ltd or Ritelite (Systems) Ltd’s distributor for more information.

  • Page 5: Section 2: Safety Rules

    Throughout this manual and on labels on the RITE-POWER 615, DANGER, WARNING and CAUTION blocks are sometimes used to alert personnel to special instructions about a particular operation that may be hazardous if performed incorrectly or carelessly.
  • Page 6 Do NOT stand on the RITE-POWER 615 or use it as any form of step. TIP OVER HAZARDS • Where ground or the area is uneven place the RITE-POWER 615 on its base to ensure it can’t fall over. •...
  • Page 7 Do NOT use the RITE-POWER 615 for any purpose other than that for which it is designed. ELECTROCUTION HAZARDS • Do NOT allow the inside of the RITE-POWER 615 to come into contact with water or any other liquids. • Ensure the RITE-POWER 615 is not being set up in a potentially explosive environment –...
  • Page 8 On slippery or uneven terrain, it is recommended that more care and thought is taken for the conditions. • Make sure when loading the RITE-POWER 615 into a vehicle or trolley that it is securely mounted/retained so it cannot fall off or move in such away that it could harm other items or personnel.

  • Page 9: Section 3: Technical Specifications

    In-built 6A 120W charging system that will recharge the battery from empty in 5-6 hours. Charger requires mains cable connected to the input side of the RITE-POWER 615 with an input voltage of between 100-240V AC. This allows the unit to recharge the battery and at the same time allow a through feed of mains power to the outlet socket.

  • Page 10: Section 4: Setting Up The Rite-Power 615

    The area should be free from moving vehicles, machinery, pedestrians or other factors which may mean the RITE-POWER 615 could form a hazard. Set the RITE-POWER 615 up in such a way that it cannot obstruct walkways or areas that form emergency exit routes.
  • Page 11 • Debris either on proposed site or on route to site • Inadequate surface support to withstand the RITE-POWER 615 weight • Water which could allow the RITE-POWER 615 to be submersed • All other possible unsafe conditions...

  • Page 12: Section 5: Operating Instructions

    Section 5: OPERATING INSTRUCTIONS Do not use the RITE-POWER 615 for any purpose other than that for which it is designed – as a portable power pack. If more than one operator is expected to set up or use a RITE-POWER 615 at different times, each operator is required to follow all safety rules and instructions in the operator’s...

  • Page 13: 5B) Using The Rite-Power 615

    100% is full capacity. 3. Make sure the RITE-POWER 615 is switched 4. Make connections to the mains output off via the button next to the display. The socket at the side of the RITE-POWER 615.
  • Page 14 5. Check the device to be powered is within the maximum constraints of the RITE-POWER 615, see technical specifications contained within this manual and on the RITE-POWER 615. Heed the notes in the section Applications and Restrictions of use with regard to Inductive, Resistive and capacitive loads and their limitations.
  • Page 15 Once the runtime required while still potentially the RITE-POWER 615 gets towards the end of providing enough light for the task in hand. the available capacity a beeping will be heard...

  • Page 16: 5C) Recharging The Rite-Power 615

    5c) RECHARGING THE RITE-POWER 615 1. The RITE-POWER 615 should be placed on charge to return it to full capacity once used. Choose a suitable location to recharge the unit away from any aforementioned hazards. Ideally the RITE-POWER 615 should be charged in a cool ventilated environment.
  • Page 17 ESTIMATED RECHARGE TIME TO FULL 100% 5. Check the display on the RITE-POWER 615, once the charger is connected and everything is ok the display will blink slowly as energy flows into the battery to recharge it. You can monitor progress on the display, the capacity percentage will gradually rise as will the capacity in AH and the voltage.

  • Page 18: 5D) Packing Away And Transport

    5d) PACKING AWAY & TRANSPORT In slippery or uneven terrain take care when carrying the RITE-POWER 615 seek help as required. TRANSPORT AND LIFTING INSTRUCTIONS • The transport vehicle/trolley must be parked on a level surface. • The transport vehicle/trolley must be secured to prevent rolling while the RITE- POWER 615 is being loaded.

  • Page 19: Section 6: Troubleshooting

    Check the output isn’t short circuited – disconnect the mains output plug, LED flashes continuously. There is turn the RITE-POWER 615 off then on and check the red fault LED isn’t capacity in the battery. flashing. Have repaired the cable/equipment causing the short circuit.

  • Page 20: Section 7: Maintenance

    • Never allow the inside of the RITE-POWER 615 to become wet, it will damage the electronics and battery pack contained within. If any wetness is discovered the unit must NOT be switched on under any circumstance and the manufacturer Ritelite (Systems) Ltd or its authorised dealer must be contacted for guidance with regards to repair.

  • Page 21: 6A) Advice On Disposal

    6a) ADVICE ON DISPOSAL OF RITELITE PRODUCTS AT END OF LIFE For our latest advice on the disposal of Ritelite products at end of life please visit the link below. https://www.ritelite.co.uk/disposal-advice 6b) DISCLAIMER OF WARRANTY For details about the warranty offered on Ritelite products please visit the link below.
  • Page 22 The contents of this manual are subject to change without prior notice. We take no responsibility for errors or admissions. Ritelite (Systems) Ltd Meadow Park, Bourne Road, Essendine, Stamford, Lincolnshire, PE9 4LT, UK Tel. +44 (0) 1780 758585 | E-mail. sales@ritelite.co.uk www.ritelite.co.uk RI-80 V2 220318...

Table of Contents