IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 3
Cleaning The unit should be cleaned only as recommended. See the section « Care and Maintenance » of this manual for cleaning instructions. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
LOCATION OF CONTROLS Top View 1. -Button Press this button to adjust volume level down. 2. + Button Press this button to adjust volume level up Button(for USB only) Press this button once to return to the beginning of current track or previous track.
·Press this button once to to advance to the next track . Power On/Standby Button Battery charging Indicator (Red color) Rapid flashing =low battery While charging : Flashing =charging Steady Red= full charged Operating mode indicator (Blue/Green/Cyan) Blue color =Bluetooth mode Green=Aux-in mode Green=USB mode Built-in Microphone...
USB power adaptor (not included) with a rated output of DC 5V 500mA and up. Note: The mini USB CHARGING JACK located on this unit is only designed for charging the built-in Li-ion battery. CHARGING THE BATTERY FOR FIRST TIME 1.) Charge the built-in Li-ion battery a minimum of 4 hours prior to first use.
Page 8
1. Charging time will vary if you are listening to music while charging the internal battery. We recommend you switch off the speaker power during the charging process. 2. To prolong the life of a rechargeable battery, it is recommended to completely discharge it before fully charging it again .
Page 9
Note: The speaker is not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if an unnatural color shifts or image distortion occurs.
Page 10
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and has a music-player function, then you can also wirelessly transfer music to the device. The A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals are wirelessly transferred between the playing device (source) and the receiving device.
Page 11
4. If your device asks for a passkey (depending on the device manufacturers, model, and software version), then enter digits “0000”(four zeros) and press OK. If pairing has been carried out successfully, a voice prompt “Pairing completed” and a beep sound is heard, meanwhile, the Blue color indicator stops flashing.
Page 12
3. Adjust the volume control of your cell phone to obtain the desired sound level. 4. To end the call, just tap the button again, a short beep sound will be heard and the call will end. If you were playing music from your cell phone to the speaker before answering the call, the music will automatically resume playing when you hang up .
Page 13
OPERATING THE SPEAKER IN AUX-IN MODE If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect this unit via bluetooth directly, you can still play it on the speaker via an audio connecting cable. 1.
(included)is not plugged USB cable (included) into the mini USB jack into the mini USB on the bottom of the jack on the MW-1306 MW-1306 No Charging Plug another device Wall outlet into the same outlet functioning.
Check whether connection exists. If Speaker is not paired to necessary, pair the the audio source. audio speaker again to the signal via the audio source. Bluetooth Increase the volume connection on the speaker Volume too low Increase the volume on the audio source.
Page 16
The right to make technical and design modifications in the course of Continuous product development remains reserved. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.
Page 17
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.
Need help?
Do you have a question about the MW-1306 and is the answer not in the manual?
Questions and answers