Related Manuals for Maniway MW-1481
Summary of Contents for Maniway MW-1481
-
Page 1: User Manual
Maniway WALL MOUNTABLE 2.1CH BLUETOOTH SOUNDBAR SPEAKER WITH BUILT-IN SUBWOOFER USER MANUAL MW-1481 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. -
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom of the apparatus. - Page 3 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. The product may be mounted to a wall only if recommended by the manufacturer. 19. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
-
Page 4: Compliance With Fcc Regulations
COMPLIANCE WITH FCC REGULATIONS FCC ID OG5MW1481 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Dear Customer
DEAR CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and t h e E l e c t r o n i c Industries Association's Consumer Electronics Group... -
Page 6: Location Of Controls
LOCATION OF CONTROLS MID-HIGH RANGE SPEAKERS RCA LINE-IN JACKS WOOFER SPEAKERS RCA COAXIAL JACK REMOTE CONTROL SENSOR 10 AUX-IN JACK - (volume down) 11 OPTICAL–IN JACK + (volume up) 12 POWER ON/OFF SWITCH 13 POWER CORD LED INDICATOR 14 USB JACK (for USB charging) RED = STANDBY BLUE = BLUETOOTH MODE CYAN = OPTICAL INPUT MODE... -
Page 7: Remote Control
REMOTE CONTROL MOVIE COAX MUTE OPTICAL (Volume down) (Volume up) PAIR AUX/RCA MUSIC Remove the protective tab for first-time use The Remote Control has a pre-installed lithium CR2032 battery. Remove the protective tab to activate the remote control battery Battery Installation 1. -
Page 8: Battery Warning
BATTERY WARNING 1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit. 2. Use only the size and type of batteries specified. 5. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty. -
Page 9: Getting Started
CONNECT POWER Risk of product damage! - Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. - Before connecting the AC power cord, ensure you have completed all other connections. - Connect the mains plug of the main unit to a mains socket. -
Page 10: Bluetooth Operation
3. Turn on the Bluetooth function for the device you want to link to, and enable the search or scan function to find the soundbar. 4. Select " MW-1481" from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) with your device. - Page 11 OPTICAL/COAXIAL (DIGITAL INPUTS) OPERATION 1. Ensure that the unit is well connected to the TV or other audio device via Optical or Coaxial cables (not included). 2. Turn on the soundbar, press the BUTTON (#6) on the main unit repeatedly or press the OPTICAL BUTTON (#3) or COAX BUTTON (#2) on the remote control to select the relevant OPTICAL or COAXIAL mode.
-
Page 12: Wall Mounting
Ecology note This product is an eco designed product. After 60 minutes without any audio input, the device will automatically switch into standby mode. Follow up the instruction manual to resume the operation. Important note: This device is equipped with an energy saving mode: if no signal is given during 60 minutes the device will switch automatically into standby mode in order to save energy. -
Page 13: Troubleshooting Guide
TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION No Power The unit is disconnected from Reconnect to the AC outlet the AC outlet AC outlet is not functioning Change to another outlet Power On/Off Switch is off Set the Power On/Off Switch to On Remote Battery empty Replace battery...
Need help?
Do you have a question about the MW-1481 and is the answer not in the manual?
Questions and answers