Table of Contents
Advertisement
Operating the appliance
en
1Operating the appliance
T hese instructions apply to several appliance variants.
O p e r a t i n g t h e a p p l i a n c e
It is possible that individual features are described
which do not apply to your appliance.
Control panel
Symbol
Explanation
Fan on/off
#
Fan settings
:
Fan run-on
y
Metal grease filter saturation indicator
E
Activated charcoal filter saturation indicator
F
Light on/off/dimming
B
Display
Explanation
Fan settings
‚
-
„
Intensive mode
˜‚
,
˜ƒ
Fan run-on in minutes
/
Metal grease filter saturation indicator
E
Activated charcoal filter saturation indicator
F
Setting the fan
Switching on
Touch the
symbol.
#
1.
The fan starts at fan setting 2.
Use the rotary selector to select the fan setting.
2.
Turn the rotary selector clockwise to set a
Note:
higher fan setting, and turn it anti-clockwise to set a
lower fan setting. The selected fan setting is shown
in the display.
Switching off
Touch the
symbol.
#
6
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Switch on the extractor hood when you start
Note:
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Turn the rotary selector until
After approx. 6 minutes, the extractor hood
Note:
automatically switches back to fan setting 3.
Switching off
If you want to end the intensive mode before the set
time has elapsed, turn the rotary selector anti-clockwise.
Intermediate position for the glass front
On some appliances, the glass front can be adjusted to
an intermediate position. The intermediate position can
be used for eliminating particularly strong cooking
smells and large amounts of steam.
Take hold of the glass front in the centre and open it
carefully.
Fan run-on time
Switching on
Touch the
symbol.
y
The fan runs at fan setting 1.
The remaining minutes of the run-on time are shown in
the display.
After approx. 10 minutes, the fan switches off
automatically.
You can use the rotary selector to adjust the run-
Note:
on time (
to
minutes).
‚
ŠŠ
Switching off
Touch the
symbol.
y
This immediately stops the fan run-on. The appliance
switches to the fan setting that was previously set.
or
is displayed.
˜‚
˜ƒ
Advertisement
Table of Contents
