Setting The Use Of Auto Play Function; Setting Sound Programs To Skip When Operating The Program Key; Setting The Function For The Program Key On The Remote Control - Yamaha AVENTAGE RXA880BL Owner's Manual

Setting the use of Auto Play function

Enables/disables Auto Play function in Internet streaming services and following input
sources.
Setup menu
"System" > "Auto Play"
Input sources
(network sources), SERVER, NET RADIO, Bluetooth, USB
Settings
Off Disables Auto Play function.
On Starts automatically to play back the last content which you played back.
Starts automatically to play back the content which only you played back
Auto
at setting the unit to standby mode.
NOTE
In some input sources or content, you might not enable Auto Play function.
Setting sound programs to skip when operating the
PROGRAM key
Set which sound programs are skipped when operating the PROGRAM key.
You can select the desired sound program quickly by using this function.
Setup menu
"System" > "DSP Skip"
Settings
Off Does not skip the selected sound program.
On Skips the selected sound program.
Setting the function for the PROGRAM key on the
remote control
Sets the function that is assigned to the PROGRAM key on the remote control. You can
use the PROGRAM key for other than DSP program selection.
Setup menu
"System" > "Remote Key" > "PROGRAM Key"
Settings
Assign1 Enables selecting the DSP Programs.
Enables selecting just the DSP Movie/Music Programs.
The up key of the PROGRAM keys: toggle between the Movie Programs
Assign2
The down key of the PROGRAM keys: toggle between the Music
Programs
Assign3 Enables selecting the NETWORK sources.
Assign4 Enables moving to the previous/next page of the Browse Screen.
Assign5 Enables fine-adjusting the subwoofer volume.
Assign6 Enables adjusting the volume of dialogue sounds.
Enables selecting shuffle/repeat settings.
Assign7 The up key of the PROGRAM keys: repeat
The down key of the PROGRAM keys: shuffle
Displays the front/on-screen display information.
Assign8 The up key of the PROGRAM keys: front display information
The down key of the PROGRAM keys: on-screen display information
NOTE
This setting does not change the function of the PROGRAM key on the front panel.
146
En