Table of Contents
Advertisement
To show or hide the Flat Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Le t/Right Arrow
buttons until the Flat Test Pattern menu is displayed.
Flat Test Pattern
2. Use the Arrow buttons on the remote to highlight O . Use the
Le t/Right Arrow buttons to select the percentage brightness
for the at test pattern. Selecting a percentage immediately
shows the at pattern at that brightness.
—or—
To disable the Flat Test Pattern, use the Le t/Right Arrow
buttons to highlight O .
3. When you are nished, press the BACK button to adjust
additional settings or EXIT.
Off
To show or hide the Ramp Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Le t/Right Arrow
buttons until the Ramp Test Pattern menu is displayed.
2. Use the Arrow buttons on the remote to highlight O . Use the
Le t/Right Arrow buttons to select the color for the ramp test
pattern. Selecting a color immediately shows that color ramp.
—or—
To hide the Ramp Test Pattern, use the Le t/Right Arrow
buttons to highlight O .
3. When you are nished, press the BACK button to adjust
additional settings or EXIT.
29
Ramp Test Pattern
Off
5
Advertisement
Table of Contents
