Table of Contents
Advertisement
Troubleshooting
Problem
Grill plates do not heat even though power
indicators are lit.
Temperature can not be controlled.
Heating appears normal but power indicators
are not lit.
No action when power is turned on.
Do not use the machine if any of the above occur.
Any troubleshooting corrections should be performed by a qualified technician.
Hinge Adjustments
Issue: Opening hinge is too tight, making it difficult to open and shut the top shell. Or opening hinge is too loose,
which can cause the top shell not to close correctly.
Solution:
Step 1 - Open the back cover
using a philips head screw driver
6
Possible Cause
Defective controller
Defective heater(s)
Defective controller
Defective indicator(s)
Defective fuse or open circuit
breaker
Step 2 - Using an Allen wrench,
adjust the tightness to feel.
Open and shut the top shell until
the tightness feels natural while
opening closing the lid. Your
manual bag includes this tool
and grease. Add the grease
while moving the top shell to
lubricate the hinge.
User Manual
Action
Replace controller
Replace heater(s)
Replace controller
Replace
Replace fuse or reset circuit
breaker
Step 3 - Close the back cover
using a Phillips head screwdriver.
Advertisement
Table of Contents
