☆ OP0ERATION:
SPLIT:
In the state of image saved already, pressing
"Division" to make 1/2 screen comparision between
the moving image and the machine saved image,
then pressing "Next" to make screen comparision between
moving image and the machine saved image.
Normal
NEXT:
In the state of Preview, pressing "Next" to
preview circularly, and pressing "Next " to save or
delete images by choosing ID .
SAVE:
Pressing "Save", to save the current image to the
imag saving chip. Note: When images are full, and
more to be saved, the previous images would be covered.
Also images could be saved to designated position. Do as
followed :Before savimg, pressing the "Next" on the remote
control, choose the position to be saved, then pressing "Save"
to save .
Vertical L1/2
10