Table of Contents
Advertisement
HOW TO USE THE BUILT-IN TIMER
Before setting the timer, make sure that the clock
setting is correct. (Page 6)
(Main unit operation)
POWER
TIMER/
ON/
SLEEP
Timer set indicator
STAND-BY
TUNER
(BAND)
CD
TAPE
(1 2)
VIDEO/
AUX
TUNING/
TIME
(
)
3
4
5
Timer playback
1
Press the ON/STAND-BY button to turn the power
on.
2
Press the CD, TUNER (BAND), TAPE (1
VIDEO/AUX button to select the desired function.
3
Press the TIMER/SLEEP button repeatedly until a
white "
" is displayed.
f
The timer set indicator will flash.
4
Press the TUNING/TIME (
X
hour start time, then press the MEMORY/SET but-
ton.
5
Press the TUNING/TIME (
X
minute start time, then press the MEMORY/SET but-
ton.
The power will be automatically turned off, and the
timer set indicator will light up.
6
When the preset time is reached, the volume will
increase gradually until it reaches the volume you
were listening to before turning off the unit.
7
If you select CD or TAPE, the power will be turned
off after the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will
be turned off one hour later.
Note:
When performing timer playback using an external
unit connected to the VIDEO/AUX jacks, only the
power of the main unit will be turned off automat-
ically. (The power of the external unit will not be
turned off.)
1
2
3
4
5
MEMORY/
SET
6
7
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Note:
The radio, compact disc and cassette deck can all be turned off
automatically.
1
2) or
V
2
To change the sleep time:
While the sleep time is displayed, press the TUNING/TIME (
or
) button to set the
W
or
(Maximum: 3 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during the sleep
or
) button to set the
operation.
W
3
4
Note:
To confirm the remaining sleep time:
Press the TIMER/SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button to enter the stand-by mode.
14
Timer recording
Press the ON/STAND-BY button to turn the power on.
Load a cassette for recording into the TAPE 2 cassette com-
partment.
Press the TUNER (BAND) or VIDEO/AUX button to select the
desired function.
Press the TIMER/SLEEP button repeatedly until a red "
displayed.
The timer set indicator will flash.
Press the TUNING/TIME (
or
X
time, then press the MEMORY/SET button.
Press the TUNING/TIME (
X
start time, then press the MEMORY/SET button.
The power will be automatically turned off, and the timer set
indicator will light up.
When the preset time is reached, the timer recording will start.
The volume will increase gradually until it reaches the volume
you were listening to before turning off the unit.
When the recording tape reaches its end, the timer recording
will end, and the power will be turned off.
Once the time is set, the setting will be retained until a new
time is entered.
Sleep operation
Play back the desired sound source.
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed.
) button to adjust the time.
W
3 hours - 5 minutes → 5-minute intervals
5 minutes - 1 minute → 1-minute intervals
Press the MEMORY/SET button.
The unit will turn off automatically after the preset sleep time
has elapsed.
Once the sleep time is set, it will remain the same duration
until the setting is changed.
" is
f
) button to set the hour start
W
or
) button to set the minute
W
X
Advertisement
Table of Contents
