Notes To Use Wireless - LG SPN4B-W Owner's Manual

34 Troubleshooting
Symptoms
When you feel the output
sound of the unit is low.
USB is not recognized.

NOTES to use wireless

Symptoms
4
This device may have
wireless interference.
Bluetooth device may
malfunction or make
noise in the following
cases.
Check the details below and adjust the unit according to them.
y With the sound bar connected with TV, change the AUDIO DIGITAL OUT
setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
y Change Audio DRC setting on connected device setup menu to [OFF] state.
y Make sure Night time mode is not On. Turn [OFF] Night time mode.
y Format the USB device and connect it again.
When formatting the USB device, select the available file system. (Page 23)
y Wireless may not operate normally in weak signal area.
y Please install the device close enough to wireless subwoofer.
y Do not install the device on metal furniture for optimum performance.
y When any part of your body contact the transceiver of the Bluetooth device
or sound bar.
y When there is an obstacle or wall or the device is installed in a secluded spot.
y When there is a device (a wireless LAN, a medical equipment or a microwave)
using same frequency, make the distance between the products as far away
as possible each other.
y When connecting the device to the Bluetooth device, make the distance
between the products as close as possible each other.
y When the device gets too far from the Bluetooth device, the connection is
disconnected and also malfunction may occur.
Cause & Solution
Cause & Solution