Table of Contents
Advertisement
20
System Setting
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and on-
screen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
3
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page 35.
[Off] (Disc Subtitle only)
Turn off Subtitle.
,
Note
Depending on the disc, your language setting
may not work.
[AUDIO] Menu
Each disc has a variety of audio output options. Set
the player's Audio options according to the type of
audio system you use.
,
Note
Since many factors affect the type of audio
output, see "Audio Output Specifications" on
page 37 for details.
HDMI
[PCM Stereo]
Select if you connect this unit's HDMI OUT jack
to a device with two-channel digital stereo
decoder.
[PCM Multi-Ch]
Select if you connect this unit's HDMI OUT jack
to a device with multi-channel digital decoder.
[DTS Re-Encode]
Select if you connect this unit's HDMI OUT jack
to a device with DTS decoder.
[Primary Pass-Thru]
Select if you connect this unit's HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
,
Note
y When [HDMI] option is set to [PCM Multi-
Ch], the audio may output as PCM Stereo
if the PCM Multi-Ch information is not
detected from HDMI device with EDID.
y If the [HDMI] option is set to [DTS Re-
Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [Primary Pass-Thru]).
Advertisement
Table of Contents
