Specifications - Greenlee Fairmont HG3505A Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS
• Inspect the hydraulic hoses and couplings every
operating day. Repair or replace if leakage,
cracking, wear, or damage is evident. Damaged
hoses or couplings can fail, resulting in injury or
property damage.
• Use this tool for manufacturer's intended
purpose only. Use other than that which is
described in this manual could result in injury
or property damage.
• Make sure all bystanders are clear of the work
area when handling, starting, and operating
the tool. Nearby personnel can be injured by
flying or falling debris or by flying parts in the
event of a tool malfunction.

Specifications

Height ............................................................................... 18.25 in. (46.4 cm)
Length .................................................................................... 23 in. (58.4 cm)
Width .................................................................................. 16.5 in. (41.9 cm)
Dry Weight ............................................................................. 55 lbs. (24.9 kg)
Engine
Type of Fuel ...................................................................................... Gasoline
Fuel Tank Capacity .................................................................. 0.7 gal. (2.7 l)
Rated Output .................................................................... 4.0 HP @ 3600 rpm
Maximum Output .............................................................. 5.2 HP @ 4000 rpm
Hydraulic System Specifications
Type of Hydraulic System ........................................................... Open-Center
Hydraulic Flow at 3600 rpm .............................................. 4.75 gpm (18 lpm)
Hydraulic Pressure - maximum ........................................... 1400 psi (97 bar)
Hydraulic Reservoir Capacity ................................................... 0.9 gal. (3.4 l)
Maximum Recommended Back Pressure ............................. 200 psi (14 bar)
200 psi is the agreed standard for the Hydraulic Tool Manufacturer's
Association (HTMA). Greenlee Fairmont tools operate efficiently at this standard.
Greenlee Textron / Subsidiary of Textron Inc.
HG3505A / 42303 Portable Power Unit
Use appropriate lifting equipment. Make sure all
components used to lift this power unit are rated
for 100 lbs (46 kg) and are securely attached
between the power unit and lifting equipment.
Inadequate components may fail and cause the
power unit to fall, resulting in injury or property
damage.
Note: Keep all decals clean and legible. Replace
decals when necessary with new decals listed
in the Parts section of this manual.
5 4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070