Advertisement
IR Touch Overlay
Installation Guide for the OLR-751
6.5 With the help from at least one partner, gently install the overlay on the monitor.
6.5.1 Hook the top bracket of the overlay on the top of the monitor.
6.5.2 Slide the overlay toward the bottom of the monitor. The sides of the overlay will slide past the
sides of the monitor.
6.5.3 Lower the overlay down to the monitor surface.
6.6 Be sure the USB cable is toward the bottom of the monitor and is not crushed or pinched
during installation.
6.7 Be sure not to scratch or damage the monitor or glass surface while installing the overlay.
6.8 Double check the monitor panel and overlay glass for dirt, smudges, or dust before securing
the overlay to the monitor.
6.9
Return the bottom bracket to its original position.
6.10 Replace the five (5) #6-32 flathead screws to secure the bottom bracket to the overlay.
6.12 Touch overlay hardware installation completed. Attach the USB output cable to your PC or media
player and enjoy your new touch capabilities!
www.necdisplay.com
Step 6.5.1
OLR-751
NEC Display Solutions of America, Inc.
Step 6.5.2
Rev 1.0
Step 6.5.3
4
Advertisement
