Advertisement
Input
1
Press (
) to activate the LED Control Button. When the LED Control Button is activated, press (
2
Among the LED Control Button, press
3
Configure the options following the instructions that appear in the bottom right corner.
4
To configure an upper menu or another item, press the LED Control Button
5
In order to exit from the OSD Menu, press the LED Control Button (
The applicable setting options are as shown below.
[All Settings] > [Input]
[Input List]
Selects the input mode.
PBP / PIP Connection
[Main]
to move to the left or right or
or press
) or press
.
SDI
SDI
-
DVI
O
HDMI
O
DisplayPort
O
) and select [All Settings] to show the complete OSD Menu.
to move to the bottom or top to go to the [Input].
to move to the settings.
Explanation
[Sub]
DVI
O
-
O
O
HDMI
DisplayPort
O
O
O
O
-
O
O
-
17
Advertisement
