Potential Equalization Conductor
1
•
Connect an equipotential plug.
2
•
Connect the RS-232C terminal with an external device to control the monitor.
3
•
Connect an AC/DC adapter.
•
The output of the enclosed adaptor is 19 V.
•
The product is designed to be used with adaptors that have an output ranging between 19-24 V.
Please use the adaptors of medical standards.
4
•
Receives or transmits digital video signals.
5
•
Receives or transmits digital video signals.
6
•
Input digital video signal.
•
Using a DVI to HDMI / DisplayPort to HDMI cable may cause compatibility issues.
•
Use a certified cable that displays the HDMI logo. The screen may not appear or a connection error
could occur if a non-certified cable is used.
•
Recommended HDMI cable types
- High-speed HDMI
®
/™ cable
- High-speed HDMI
®
/™ Ethernet cable
7
•
Receives or transmits digital video signals.
•
There may be no video output depending on the DisplayPort version of your PC.
•
A cable with DisplayPort 1.2 specifications is recommended when using a Mini DisplayPort to
DisplayPort cable.
10
8
•
Used for HW Calibrator (Optional Accessory) connection.
•
Connect peripheral device to the USB input port.
•
A keyboard, mouse, or USB storage device can be connected.
•
To use USB 2.0, connect the A-B type USB 2.0 cable to the PC.
CAUTION
Cautions When Using a USB Storage Device
•
A USB storage device which has a built-in automatic recognition program or uses its own driver
might not be recognizable.
•
Some USB storage devices may not be supported or may not work properly.
•
It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supplied
is not enough, the USB device may not be detected properly.)
9
- This USB port is used only for service.
NOTE
•
All signal out terminals (SDI, DVI, etc.) output a signal when the power switch of the monitor is on. When the
power switch is off, no signal is outputted.
•
This monitor supports the
*
: A feature that allows you to add a device to your computer without the need for physical
device configuration or user intervention.
•
The standard of the DVI and the SDI output terminals for transmitting a screen
-
: Connect a 5-meter cable to transmit a duplicated screen to a monitor.
-
: Connect a 100-meter cable (BELDEN 1694) to transmit a duplicated screen to a monitor.
feature.