Troubleshooting; Repairs, Spare Parts - XciteRC Flybar 190E Manual

Troubleshooting · Repairs

Troubleshooting

Problem Possible Cause
Rotor don't move ON/OFF switch is OFF
Weak helicopter battery
Transmitter - model not bound
Rotor stops sud- Weak helicopter battery
denly, helicopter Weak transmitter battery
chrashes
The helicopter Gyro initialisation failure
does not react to
the remote control. Another radio controlled device using
Loss of control. the same channel
Affected by sunlight or other strong
light

Repairs, Spare Parts

Normal wear and defective parts that result from an accident, are excluded from the guarantee. These in-
clude in particular:
For car models: bald tires, worn parts and drive gears, or bent / broken suspension, chassis or bodywork
For ship models: damaged or broken propellers, torn superstructure
For airplanes: damage due to improper transportation or crash
I If you find a part that is defective in material or workmanship right after opening the package, return - before
you used it – to your dealer or directly to us and we will send you a replacement.
For the Flybar 190E some parts are available as spares. If a part is defective or worn, you can identify it with
the help of the exploded view.
In case of problems or questions, please contact your dealer or:
XciteRC Modellbau GmbH & Co. KG - Service, Autenbachstrasse 12, D-73035 Göppingen, Phone +49 7161
40 799 50
Email: service@xciterc.de
Spare parts for the XciteRC FLYBAR 190E you may order in your local hobby shop or online at http://www.
XciteRC.de/
XciteRC Flybar 190E Easy
Corrective Action
Switch ON helicopter
Re-charge battery
Rebind: first switch on the model, then the
transmitter
Re-charge battery
Change transmitter batteries
Place the model on a flat surface when
switching on
Switch off another/own device or move to
another spot
Avoid direct sunlight or other strong
light
EN
23