Table of Contents
Advertisement
D
I
RIVER
NSTALLATION FOR
6. The Adapter Setup dialog box will appear. Configure the card
as described below, and click "OK."
I/O Base - Default: 240 (Check for available resources under
Windows NT Diagnostics.)
IRQ Level - Default: 9 (Check for available resources under
Windows NT Diagnostics.)
Mode - Set to "802.11 AdHoc" or "Infrastructure," depending
on the type of network you want to connect to (see page 14).
SS ID - A service set consists of all the stations in a wireless
network. ("Network Configuration and Planning" on page 14.)
All of these stations should have their SSID set to the same
value to identify stations within this network. (Default: ANY)
DS Channel - If you are setting up an ad hoc wireless LAN
(see page 14), set the channel number to the same radio
channel as that used by the other wireless clients in your
group. However, if you are connecting to a network via an
access point, then the channel will be automatically set to that
used by the access point. (SMC2655W Access Point default: 11)
10
W
NT
INDOWS
AND
W
XP
INDOWS
Advertisement
Table of Contents
