Connect the power plug properly by pushing it to the end.
If a contact failure occurs, it may cause product damage or fire.
•
Do not bend the power cable for AC adapter too much or get stamped by a
sharp object.
The wires inside the cable may break and cause electric shock or fire.
•
Do not use loose plugs or damaged power cords.
An electric shock or fire may occur.
•
Do not touch the power cord with your hands wet.
Otherwise, an electric shock may occur.
•
Pull the plug, not the cord, to disconnect the AC adapter and power jack.
Otherwise, a fire or product damage may occur.
•
Operate the product at the proper voltage.
Excessive voltage may result in damage on the product, electric shock or fire.
•
Use power outlets with an earth pin installed and proper supply of rated
electricity.
An electric leakage may cause an electric shock or fire.
•
The shape of the power cord and outlet may differ by country and region.
•
In the case of strange noise from the cord or plug, disconnect the power
cord from the outlet immediately and contact the service center.
A fire or electric shock may occur.
•
Use the power supply/adapter provided with the product and never
disassemble the product.
Using a different product or disassembling it may cause an electric shock or
•
fire.
Introduction / Important Safety Precautions
17