Advertisement
3. Install Rear cooling panel
A
Attach Thermistor
Use supplied magnetic cube to
hold thermistor in place on top of
the hottest piece of equipment
closest to the heat source.
B
Plug in Power Supply
Plug in Ac adaptor bottom center
behind fan grill.
Salamander 3 Bay AV Credenza
Alternative connection, connect the
thermistor directly to the component.
Loosen screw and slip the thermistor
wire under the screw head and tighten.
C
Install Rear Cooling Panel
Squeeze in the provided handled slots and
pull outward until panel is free.
NOTE:
Reverse step for re-installation.
Upon removal, carefully place rear panel in
the up right position so not to damage the
fan assembly.
503-230 [5.17]
page 6 of 7
Advertisement
