Greenlee 3561 Instruction Manual page 11

Wiring Diagram
NOTES: 1. Assemble switches into cover with lever up.
2. Follow standard ESD procedures for handling control board assembly.
3. Test slip-on connections by tugging slightly after connection.
If the connector is loose on the tab, adjust the connector using
needlenose pliers or similar tool.
4. Potentiometer (R11) should be calibrated and sealed from board supplier.
Greenlee / A Textron Company
31
BLACK
TO J5
WHITE
TO J7
K1
32
TO J2
BLACK
WHITE
NOTE: When assembled, the toggle should be pointing up and wired as follows:
+
20
NOTE: Wire must pass through
hole in T1 Coil
NOTE: Install receptacle with
brand name to top of unit
27
X
34
Boost: Center Screw and Top Screw
Reset: Center Screw and Bottom Screw
11
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
03561 Speed Booster
W
Y
CHASIS
GROUND
(on box)
(RESET)
(BOOST)
36
GREEN
23
23