Table of Contents
Advertisement
Installation
STEP 5 Level the dryer
To ensure optimal performance, the dryer must be level.
A
B
A
28
English
FlexDry_DM9600M-DC68-03381H_EN.indd 28
1.
Using a level (A), check if the dryer
is level side to side and then front to
back. If the dryer is not level, adjust
the leveling feet (B) at the bottom of
the dryer. Then, check if the dryer is
level again.
• To set the dryer to the same height
as your washer, fully retract (A)
the leveling feet by turning them
counterclockwise, then loosen (B)
B
the feet by turning them clockwise.
Once the dryer is the same height
as the washer, follow the directions
above to level the dryer.
• Adjust the leveling feet only as
much as necessary to level the
dryer. Extending the leveling feet
more than necessary can cause the
dryer to vibrate.
NOTE
2017-01-29
10:47:34
Advertisement
Table of Contents
