Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Luxibel ® ! Please read the manual thoroughly before bringing this device into service.
LXMH10004 General Guidelines ® Refer to the Velleman Service and Quality Warranty on the last pages of this manual. Keep this device away from dust and extreme temperatures. Make sure the ventilation openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in front of the openings.
LXMH10004 The device has a power output to supply power to another device. When connecting several devices in a daisy chain via this output, make sure that the total current does not exceed the power line’s nominal current. Use power cables with an adequate section.
LXMH10004 terminator How to turn the controller line from 3-pins into 5-pins (plug and socket). Operation The device can be used in the following modes: stand-alone mode master/slave mode with a DMX-512 controller. Control Panel Access the control panel functions using the four panel buttons located around the display:...
LXMH10004 Menu Stand-Alone Mode The device starts running in stand-alone mode after connection to the mains. This mode allows you to use the device without controller. Connect the device to the mains to switch it on. Press MENU to enter the menu.
Page 8
LXMH10004 Slave units: Connect the DMX input from your slave device to the DMX output of the previous device in the chain. Connect the slave device to the mains to switch it on. Press MENU to enter the menu. Select the slave mode with UP or DOWN and press ENTER to confirm.
Page 9
LXMH10004 no function forwards tilt, slow > fast continuous tilt no rotation backwards tilt, slow > fast red from 0-100 % green green from 0-100 % blue blue from 0-100 % white white from 0-100 % LED off LED on strobe, slow >...
LXMH10004 no function reset all motor reset no function red LED 1 red from 0-100 % green LED 1 green from 0-100 % blue LED 1 blue from 0-100 % red LED 2 red from 0-100 % green LED 2...
LXMH10004 Detailed Setting General Info Cleaning and Maintenance All screws should be tightened and free of corrosion. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports, do not change the location of the connections…...
Page 13
Velleman® Service and Quality Warranty Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations.