Luxibel LX307 User Manual

Luxibel LX307 User Manual

10-segment led strobe dmx-controlled

Advertisement

Quick Links

LX307
NUXILED 1001 – 10-SEGMENT LED STROBE – DMX-CONTROLLED
USER MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Luxibel LX307

  • Page 1 LX307 NUXILED 1001 – 10-SEGMENT LED STROBE – DMX-CONTROLLED USER MANUAL...
  • Page 2 LX307 V. 02 – 21/04/2015 ©Velleman nv...
  • Page 3: Safety Instructions

    Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Luxibel ® ! Please read the manual thoroughly before bringing this device into service.
  • Page 4: General Guidelines

    LX307 General Guidelines Refer to the Velleman ® Service and Quality Warranty on the last pages of this manual. Keep this device away from dust and extreme temperatures. Make sure the ventilation openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in front of the openings.
  • Page 5: Installation

    LX307 Overview Refer to the illustrations on page 2 of this manual. Safety ring LED display power input 3-pin DMX output 3-pin DMX input fuse control panel power output Installation Choose a suitable mounting spot. Mount the device in the desired angle using the included bracket.
  • Page 6: Operation

    LX307 Operation The device can be used in the following modes:  stand-alone mode  master/slave  with a DMX512 controller. Control Panel Access the control panel functions using the four panel buttons located directly underneath the display. From left to right:...
  • Page 7: Standalone Mode

    LX307 Ring 6 intensity (0-255) Ring 7 intensity (0-255) Ring 8 intensity (0-255) Ring 9 intensity (0-255) Ring 10 intensity (0-255) Stand-Alone Mode In stand-alone mode, the device runs one of the built-in programmes. To set the device to stand-alone mode: Unplug any connection from the DMX input of the device.
  • Page 8 LX307 To set the device to work with a DMX controller: Press MENU and select your channel mode (<d.001>, <A.001> or <P.001>) with UP and DOWN. Use UP and DOWN to set the DMX start address and press ENTER. Start addresses Use the table below to define the correct address.
  • Page 9: Cleaning And Maintenance

    (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.luxibel.com. The information in this manual is subject to change without prior notice. © COPYRIGHT NOTICE The copyright to this manual is owned by Velleman nv.
  • Page 10 Velleman® Service and Quality Warranty Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations.

This manual is also suitable for:

Nuxiled 1001

Table of Contents