Subscribe to Our Youtube Channel
Related Manuals for Mojave MA-50
Summary of Contents for Mojave MA-50
- Page 1 MA-50 Solid State Condenser Microphone Please visit www.mojaveaudio.com for more information including: • Recording Tips • FAQ’s • Warranty Registration • Customer Service CONTENTS INTRODUCTION UNPACKING AND INSPECTION SAFETY INSTRUCTIONS OPERATION CARE OF YOUR MICROPHONE TECHNICAL SPECIFICATIONS POLAR RESPONSE FREQUENCY RESPONSE...
- Page 2 Your MA-50 was thoroughly tested and given a factory burn-in prior to shipment. The MA-50 is guaranteed to perform as specified and is suitable for recording even the most demanding music, provided that the microphone is used sensibly.
- Page 3 Make sure that the microphone stand is secure and not likely to fall. If you have any questions or concerns about operation of your MA-50 please contact the factory. OPERATION When plugging the microphone in, the three-pin XLR connectors between the microphone and the mic preamp should be inserted gently into their corresponding sockets.
- Page 4 5. Do not expose the microphone to dusty, smoky or humid environments. 6. Do not attempt repairs unless you are a qualified technician. There are no user serviceable parts in the MA-50. 7. Use a soft, lint free cloth to remove fingerprints and other blemishes on the microphone body.
- Page 5 POLAR RESPONSE Type: Cardioid FREQUENCY RESPONSE 20Hz – 20kHz, ±2.5dB...
- Page 6 WARRANTY Your Mojave Audio product is warranted to the original owner for a period of two years. Mojave Audio guarantees this product to be free from electrical and mechanical defects and will repair or replace defective components, or replace the microphone at Mojave Audio's option. Should service be required for your Mojave Audio product, please contact the manufacturer.
Need help?
Do you have a question about the MA-50 and is the answer not in the manual?
Questions and answers