LG CineBeam AI ThinQ HU70LAB Owner's Manual page 146

94
[Time & Date]
(Q. Settings)
You can check or change the time while watching the projector.
• [Set Automatically]
Automatically sets the time displayed on the projector screen to the time of the
digital broadcast sent by the broadcasting company.
•
[Time]/[Date]/[Time Zone]
You can set the time and date manually if the automatically set current time is
incorrect.
[Sleep Timer]
(Q. Settings)
Sets the projector to turn off at a specified time.
If you want to disable [Sleep Timer], select [Off].
[Timer Power On]/[Timer Power Off]
(Q. Settings)
Off]
You can set the power on/off time for the projector.
Select [Off] if you are not going to set [Timer Power On]/[Timer Power Off].
• To use [Timer Power On]/[Timer Power Off], set the time correctly.
[Auto Off]
(Q. Settings)
If there is no input signal or button press, the projector automatically turns off after the
preset time has elapsed.
[General] [Time & Date]
[General] [Timers]
[General] [Timers]
[General] [Timers]
[Sleep Timer]
[Timer Power On]/[Timer Power
[Auto Off]