4. Plug the transformer into a properly grounded electrical
outlet. Fig. 4
TROUBLESHOOTING
If lights fail to illuminate, check that lights are getting power by testing another appliance in the same
•
power outlet.
The light is designed to turn on when it gets dark, and turn off when it gets light. To activate the light
•
during daylight hours, cover the sensor.
If lights do not turn off during daytime, check sensor. Make sure the sensor faces up and is not
•
covered by dirt or debris.
CARE AND MAINTENANCE
Periodically, your lights may require cleaning for optimal performance.
•
Cleaning should only be done with warm soapy water. Be sure to use biodegradable soap.
•
The frequency of cleaning depends upon the conditions of the environment where lights are used.
•
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-755-5641, 8 a.m.-6 p.m., EST,
Monday-Friday.
Part
Description
Stone landscape &
A
pond lights
B
Sensor
C
Transformer
B
3
GFCI
Fig. 4
A
C
Printed in China