Advertisement
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
•
No tools required for assembly.
•
ASSEMBLY INSTRUCTIONS
1. Connect the light to the sensor by pushing the plug into the
sensor socket until it is firmly seated. Hand tighten the nut
from the plug to the socket. Fig. 1
2. Connect the sensor to the transformer by pushing the plug
into the transformer socket until it is firmly seated. Hand
tighten the nut from the plug to the socket. Fig. 2
3. Place the lights in or out of the water. Make sure that the
transformer and sensor are NOT submerged. Make sure that
the light sensor faces up. Fig. 3
NOTE: At night, the lights will automatically turn on.
At sunrise, they will automatically turn off.
2
Sensor
Plug from
lights
Fig. 1
Transformer
Plug from
sensor
Fig. 2
(Must face up)
Light sensor
Fig. 3
Advertisement
