Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Svan SVC1861NFX
Summary of Contents for Svan SVC1861NFX
- Page 1 UP RIGHT FREEZER SVC1861NFX...
- Page 2 Names of the components Apologizing for some features and accessories of the refrigerator you brought might not accord with the illustrations, refer to the packing list in the refrigerator please. Please go through this manual before use. Thank you for purchasing our products. Attention: * Please understand the safety instructions before use.
- Page 3 Correct application of the refrigerator Ensure that the refrigerator is placed correctly and stably. Be aware of all safety matters needing attention. ● Except the solutions recommended by the manufacturer, do not use mechanical 1.Connect the electricity equipment or other means to accelerate defrosting. After connecting electricity, it will enter into ex-factory state.
-
Page 4: Function Introduction
Function introduction All following functions must be worked under start state. Quick-Frozen Mode entry ● When the system is at non Quick-Frozen Mode, press and hold Super FRZ key (A key) for three seconds to start the Quick-Frozen Mode, and quick-frozen icon will be lit up, and the display screen will show the defaulting quick-frozen time (6 hours). -
Page 5: Matters Needing Attention
Matters needing attention 8. High temperature warning of the refrigerating chamber When the temperature of the refrigerating chamber has been above －8℃ for six hours, Do not arbitrarily dismantle Use standard professional three- high temperature warning will ring. The buzzer will ring per second for ten times and then or repair. - Page 6 Fingerprints are easily left on its exterior. Use a dry towel to wipe up. Periodically clean the dust both at the back of and under the refrigerator. Refrigerator interior should be cleaned frequently so as to avoid foreign odor. After the power is cut off, use soft towel and neutral Left cover plate detergent to clean and wipe with the clean water.
- Page 8 FREEZER CABINETS 1 Step:Put two cabinets together with only 10mm gap. 2 Step: Fit the lower connecting hinge at the bottom of two cabinets. Fix the connecting hinge to the place as shown in the picture. 3 Step:Put the bar inside the gap between two cabinets. The connecting Step finished.
Need help?
Do you have a question about the SVC1861NFX and is the answer not in the manual?
Questions and answers