14
CUSTOMIZING SETTINGS
Customizing Settings
Menu Settings
1
Press any button on the front of the Monitor set to display the
MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the OSD
menu.
3
Set the options by pressing the ◄ or ► or ▼ buttons.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the
up arrow (
) button.
The available MENU settings are described below.
Menu
Analog
BRIGHTNESS
●
ORIGINAL RATIO
●
COLOR TEMP
●
CONTRAST
●
BLACK LEVEL
(Only supported
-
in HDMI mode)
LANGUAGE
●
SUPER ENERGY
●
SAVING
FACTORY RESET
●
y
Analog: D-SUB(Analog signal) input.
y
Digital: DVI-D(Digital signal) input.
y
HDMI: HDMI(Digital signal) input.
Digital
HDMI
Adjusts the brightness of the screen.
●
●
WIDE
Switch to full screen mode according to input image signal.
ORIGINAL
●
●
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
PRESET
Select the screen color.
y WARM: Set the screen to warm color temperature (more red).
y MEDIUM: Set the screen to medium color temperature.
y COOL: Set the screen to cool color temperature (More blue).
●
●
USER
y RED: Set your own red color levels.
y GREEN: Set your own green color levels.
y BLUE: Set your own blue color levels.
Adjusts the contrast of the screen.
●
●
You can set the offset level. If you select 'HIGH', the screen will be
bright and if you select 'LOW', the screen will be dark.
-
●
y Offset: As the criteria for video signal, it is the darkest screen
the monitor can show.
Changes the menu language.
●
●
Move the SUPER ENERGY SAVING function.
●
●
Returns the monitor to original factory settings except
●
●
"LANGUAGE".
Description