Table of Contents
Advertisement
Connecting an AV receiver or digital sound bar
You can enjoy Dolby Audio
either of two ways:
• DIGITAL OUTPUT (OPTICAL) (S/PDIF) – Connect a TOSLINK optical cable (not provided) from the TV to the Optical
input on your receiver or sound bar.
®
• HDMI
ARC – Connect an HDMI
receiver or sound bar. This connection uses the Audio Return Channel (ARC) feature of the HDMI
sound from the TV to a compatible device. To use this feature, you must configure the TV to enable HDMI
explained in
Enabling HDMI ARC on page
TV PORTS
Preparing for Internet connectivity
Connecting to a Wireless Network – You have the option to connect your TV to a wireless or wired network to access the
Internet. We recommend that your wireless connection support the IEEE 802.11b/g/n specification for the best experience.
NOTES
• You must use the Hisense built-in Wireless LAN Adapter to use a wireless network because the TV does not support an
external USB network adapter.
• To use a wireless network, your TV must be connected to a wireless IP access point (IP sharer is not a common term in
the US). If the wireless IP sharer supports Dynamic Host Configuration Protocol (DHCP), your TV can use a DHCP or
static IP address to connect to the wireless network.
• If you apply a security system other than the systems listed below, it will not work with the TV.
Connections and setup
™
multichannel sound from your TV if you connect a digital amplifier or sound bar (not provided) in
®
cable (not provided) from the HDMI (ARC) connector to the HDMI
54.
Optical Cable
HDMI Cable
(not included)
Wireless Adapter
built-in the TV set
EXTERNAL DEVICES
Digital Sound Bar
Powerless
Audio Amplifier
Bass Speaker
Wireless Wi-Fi device or
Wireless IP sharer
LAN Cable
8
®
input on your
®
specification to output
®
ARC, as
Speaker
The LAN Port on the Wall
Advertisement
Table of Contents
