LG 52LD550 Owner's Manual page 11

STAND INSTRUCTIONS
(For 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500,
42/47/55LX6500)
ꔛ
Image shown may differ from your TV.
INSTALLATION
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Loosen the bolt underneath the stand base
2
and straighten the insert so that the stand
body will sit straight. Assemble the parts of
the STAND BODY with the STAND BASE of
the TV. At this time, tighten the screws that
hold the STAND BODY on.
STAND BODY
M4 x 20 M4 x 24
(47/55LE8500)
(55LE5400/5500/7500,
55LX6500, 42LE5350)
M4 x 16
M4 x 26
(Other models)
(47LE5350)
3
Assemble the TV as shown.
Assemble the part of the STAND REAR
4
COVER with the TV.
STAND REAR
COVER
5
Install the 4 screws into the holes shown.
M4 x 20
(47/55LE8500)
M4 x 16
(Other models)
!
NOTE
►
When assembling the desk type stand, make sure the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the product installation). Do not over tighten.
DETACHMENT
1
2
3
STAND BASE
4
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Remove the screws that hold the stand on.
Detach the STAND REAR COVER from TV.
Detach the stand from TV.
11