Troubleshooting - Frigidaire FDC8203P User Manual

PROBLEM
You cannot activate the appliance.
The programme does not start.
The appliance door does not close.
The appliance stops during operation.
The cycle time is too long or unsatisfactory
1)
drying result.
The display shows Err.
The display shows (e.g. E51).
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not satisfactory
• The set programme was incorrect.

TROUBLESHOOTING

POSSIBLE SOLUTION
Make sure that the mains plug is connected
to the mains socket.
Check fuse in fuse box (domestic installa-
tion).
Press Start/Pause.
Make sure that the appliance door is closed.
Make sure that the installation of the filter
is correct.
Make sure that the laundry does not catch
between the appliance door and the rubber
seal.
Make sure that the water container is emp-
ty. Press Start/Pause to start the pro-
gramme again.
Make sure that the weight of the laundry is
applicable to the duration of the pro-
gramme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in
the washing machine again.
Ensure that the room temperature is higher
than +5°C and lower than +35°C. Optimal
room temperature is 19°C to 24°C.
Set the Time Drying or the Extra Dry pro-
2)
gramme.
If you want to set a new programme, deac-
tivate and activate the appliance.
Make sure that the options are applicable to
the programme.
Deactivate and activate the appliance. Start
a new programme. If the problem occurs
again, contact the Service.
• The filter is clogged.
• The condenser is clogged.
19