Table of Contents
Advertisement
SMART FUNCTIONS
Using the Smart Diagnosis™
Function
Use this function if you need an accurate
diagnosis by an LG Electronics service
centre when the product malfunctions or fails.
Use this function only to contact the service
representative, not during normal operation.
1
Press the An/Aus button to turn on the
washing machine. Do not press any other
buttons or turn the programme selector knob.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to
the An/Aus button.
3
Press and hold the Temperatur button for
three seconds, while holding the phone
mouthpiece to the icon or An/Aus button.
4
Keep the phone in place until the tone
transmission has finished. Time remaining for
data transfer is displayed.
• For best results, do not move the phone
while the tones are being transmitted.
• If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
LG Electronics
service centre
32
5
Once the countdown is over and the tones
have stopped, resume your conversation with
the call centre agent, who will then be able to
assist you using the information transmitted
for analysis.
NOTE
• The Smart Diagnosis™ function depends on
the local call quality.
• The communication performance will improve
and you can receive better service if you use
the home phone.
• If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
EN
Advertisement
Table of Contents
