Hitachi R-S600PTH0 Instruction Manual page 9

Other Functions
1
How to use temperature control
■
Setting
Press button "Refrigerator"
for 5 seconds until
1 "Peep!" sound is heard.
■
Cancel
Press button "Refrigerator"
for 5 seconds until 1 "PiPi!"
sound is heard.
2 Quick Freezing/Quick Cooling/Energy Saving
Quick Freezing : When you want to freeze food or make ice quickly, use this function
Quick Cooling : When you want to cool food or drinks quickly, use this function
Energy Saving : Recommend to use this function in case of low storage volume, or a long vacation when the doors are not opened for long time.
1
Press button "First time"
for Start Quick Freezing
operation, lamp light is on.
After 2 hours (approx.) Quick freezing
operation will be finished, lamp light is off.
3
Press button "Third time"
for start two function operation,
lamp both light is on.
5
Press button"Fifth time"
for stop all function operation
lamp light is off.
NOTICE
● During "Quick Freezing", priority cooling of the freezer compartment will be done, Thus, try to avoid unnesessary opening
and closing the doors not to have a temperature rise of the refrigerator compartment.
● During defrost period,"Quick Freezing" and "Quick cooling" operation will stop even though the lamp is on. After finishing
defrost period, the operation will restart automatically.
● Please note "Quick Freezing" and "Quick Cooling" mode will be released after power cut off or unplug.
Open the Refrigerator door before press buttom "Refrigerator" to setting.
Each time you press the button, the corresponding indicator lamp changes in order shown below (9 steps).
( Lighting
Indication
lamp
Setting
Min
Open the Refrigerator door before press button "Refrigerator" to setting.
You can set temperature by normal step ( 3 steps).
NOTICE
● This function is subjected to change according model type.
●
Factory setting, the adjustment temperature by normal step ( 3 steps).
(Refrigerator compartment/ Freezer Compartment)
Blinking Turned off )
Normal
2
Press button"Second time"
for Start Quick Cooling
operation, lamp light is on.
After 90 minutes (approx.) Quick cooling
operation will be finished, lamp light is off.
4
Press button"Fourth time"
for Start Energy Saving
operation, lamp light is on.
CAUTION
If "Energy Saving" operation is working in high humidity
environment, dew may appear
Please stop "Energy Saving" operation in this case.
Max
on refrigerator surface .
9