Glacier bay HD67726W-1108D2 Installation And Care Manual page 6

Installation (continued)
5
Installing the weight
□
Install the weight clip (G) at the point of the
hose marking "weight here".
□
Insert the weight (F) onto the clip (G) by sliding
it down onto the clip (G).
F
F
G
G
6
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
1
2
6