Panasonic KX-TG8107UA Service Manual page 44

KX-TG8107UA/KX-TG8108UA/KX-TGA810UA
9.2.2. Check Point (Charger Unit)
Items
(A) Charging Check
Note:
After the measuring, suck up the solder of TP.
The connection of adjustment equipment is as shown in Adjustment Standard (Charger Unit) (P.57).
Check
Point
- 1. Connect Charge Contact 12Ω/2W resistor between charge+ and charge-.
2. Measure and confirm voltage across the resistor is 3.3V ± 0.2V.
Procedure
44
Check or
Replace Parts
R2, R1, R3, R4