Page 1
ORIGINAL INSTRUCTIONS Multi-pad Sander RMS180...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
Safety, performance, and dependability have been given Keep cord away from heat, oil, sharp edges or top priority in the design of your multi sander. moving parts. Damaged or entangled cords increase the risk of electric shock. INTENDED USE ■ When operating a power tool outdoors, use an extension cord suitable for outdoor use.
the power tool before making any adjustments, WARNING changing accessories, or storing power tools. Such A suitable breathing respirator must be worn while preventive safety measures reduce the risk of starting sanding lead paint, some woods and metal to avoid the power tool accidentally.
WARNING MAINTENANCE Injuries may be caused or aggravated by prolonged use of a tool. When using any tool for prolonged periods, WARNING ensure you take regular breaks. The product should never be connected to a power supply when assembling parts, making adjustments, cleaning, performing maintenance, or when the product KNOW YOUR PRODUCT is not in use.
CLEANING THE SANDING SHEETS The sanding sheets that come with the product are made to Disconnect from the power supply. be re-used. Therefore, it is important that they be cleaned periodically to remove sanding residue and foreign material that can accumulate over time. To clean sanding sheets, rub the sheets with a hard rubber Parts or accessories sold separately block.
PRODUCT SPECIFICATIONS Multi-pad sander Model RMS180 Voltage 220 - 240 V 50 / 60Hz Power 180 W Orbital minute 6,000 - 12,000 min Pad size Delta pad 168 x 100 mm Finger pad 26 x 47 mm 1/3 Sheet pad 185 x 92 mm Weight 1.4 kg...
Page 20
4. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation.
Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany Herewith we declare that the product Multi-pad Sander Brand: RYOBI Model number: RMS180 Serial number range: 46229802000001 - 46229802999999 is in conformity with the following European Directives and harmonised standards 2006/42/EC, 2014/30/EU, 2011/65/EU...
Page 22
20160919v1 Techtronic Industries GmbH Max-Eyth-Straße 10, RYOBI is a trademark of Ryobi Limited, 71364 Winnenden, Germany and is used under license. 20190124v3...
Need help?
Do you have a question about the RMS180-S and is the answer not in the manual?
Questions and answers