Table of Contents
Advertisement
• When "Switch to mobile data" has a
check mark, if the mobile network icon is
displayed on the status bar, it indicates
that the mobile network is being used
and note that the packet communication
fee will occur.
When the popup screen of switching
mobile data is displayed, select "Don't
show this again" and tap "OK" so that the
popup screen is not displayed anymore.
From then on, if the Internet is connected
to an unavailable wireless LAN, it
switches to the mobile network and note
that the packet communication fee will
occur.
• If the access point which is not being
connected to the Internet is being
connected,
is displayed and the mobile
network may be used to communicate
instead of Wi-Fi
.
®
• If the docomo service is being used via
Wi-Fi
®
when using Wi-Fi
needs to be set.
From the Home screen, "Apps" u
"Settings" u "docomo service/cloud" u
"docomo ID 設定 (docomo ID setting)" to
set.
®
, "docomo ID"
Adding a Wi-Fi
network
®
From the Home screen, "Apps" u
a
"Settings" u "Wi-Fi"
Turn on "Wi-Fi"
b
u "Add Wi-Fi"
c
Enter network SSID in the "Wi-Fi
d
name (SSID)" box
Tap "Security" box
e
• Select the appropriate type from "None",
"WEP", "WPA/WPA2 PSK", and "802.1x
EAP".
• The setting method differs depending on
the security settings.
"Connect"
f
Disconnecting a Wi-Fi
From the Home screen, "Apps" u
a
"Settings" u "Wi-Fi"
Tap the name of Wi-Fi
b
you want to disconnect
"Disconnect"
c
network
®
network that
®
Settings
187
Advertisement
Table of Contents
