inventum DRS9000AC Instruction Manual page 26

INSTALLATION OF THE WINDOW SEAL SET
The flexible window seal set is suitable for many windows. Such as: tilt and turn windows, windows turning to the outside and
inside. It ensures that you are able to hang the discharge hose to the outside, without hot air flowing indoors again or having
problems with insects.
For windows turning to the outside, we recommend taping all four sides (a+b+c+d) around the window and for windows
turning to the inside only three sides (a+b+c).
• Attach the supplied double-sided tape on the window frame and the window in accordance with one of the drawings
below that is similar to your situation.
• Then attach the cloth to the tape that you attached in the openings.
Fig. 1
Fig. 4
Fig. 7
1. Attach the supplied double-sided tape on the window frame.
2. Then attach double-sided tape on the window.
3. Cut away excess tape.
4. Make sure the tapes on the corners properly overlap to achieve proper sealing.
5. Attach the cloth to the tape attached to the window frame and window.
6. Make sure the cloth is neatly attached to the tape on both sides.
7. Zip open the cloth.
8. Insert the discharge hose through the opening and zip the cloth closed to achieve proper sealing.
26
• English
Fig. 2
Fig. 5
Fig. 8
Fig. 3
Fig. 6