Table of Contents
Advertisement
Power On and Self-Test
Each time your Whistler detector is turned on, an automatic
self-test sequence confirms that the speaker, visual displays
are functional along with many of the saved settings. To
increase the volume, continue turning the volume knob.
Memory/Beep Confirmation
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one beep
confirms feature "on", two beeps confirm feature "off".
Audio Level Adjustment
To change the audio level:
•
Move Power/Volume knob back to increase audio level.
•
Move Power/Volume knob forward to decrease audio level.
Quiet Mode
Quiet mode cancels audio during an alert and any new
alert within 20 seconds. After 20 seconds of no radar signal
detected, the audio alerts are restored.
•
Press Quiet to cancel the audio.
•
Press Quiet a second time during an alert to restore the
standard audio alert pattern.
OPERATION
11
Advertisement
Table of Contents
