Mobile Action Q-Band X2 User Manual

Device Overview
Reversible Wristband
How to wear your Q-Band X2?
1
Wear Q-Band X2 on your wrist
Put on the wristband with the screen facing up and the band wrapped around
your wrist. Slide one band through the loop of the other band, and align the
clasp along the band to find the holes where best fit the clasps.
Video Demo:
http://ww2.voiis.com/igotu-life/wear/Q-Band-X2
3
Charge your Q-Band X2
1
To charge your Q-Band X2, place it in the charging box at the other end of
the USB cable. Close the box afterwards, and make sure the Q-Band X2 is
securely covered. Plug the USB connector to either a PC or power adapter
to start charging.
Important Notice:
The product is shipped with the screen and keys locked, and will be unlocked once it is
charged via USB connection. Please make sure the "Charging" icon appears while it is
being charged, indicating the device is connected correctly and getting charged.
X2
Touch Button
Video Demo
2
3
Charging icon
(
Q-68
Core
Metallic contact for charging
2
Fasten Q-Band X2 with clasp
Squeeze both clasps into the holes on the wristband until you hear
a click, indicating the band is securely fastened.
Note: The wristbands are both replaceable and reversible.
4
Change the wristband
1
2
1. Remove the wristbands by sliding out both bands from the slots on both sides
of the core.
2. Insert the new bands into the slots on both sides of the core.
Important Notice:
Failure to follow the instructions above might cause damage to the device.
( User Manual
EN
Clasp