Zephyr PRW24F01BG Use, Care And Installation Manual page 14

Installation Instructions
Reversing the door swing of your appliance
Should you desire to reverse the opening direction of the door, please follow the instructions below:
1. Open the door and using a Phillips screwdriver, remove the bottom screws from
the lower hinge.
2. Pull down to remove the glass door and place it on a padded surface to prevent
scratching it.
3. The door revolves 180 degrees. Remove the switch and install it on the opposite
side. Door reversal operation at least two persons.
4. Remove the screws from the upper right hinge. Place the upper right hinge in a
safe place in case you need to reverse the door in the future. Remove the
plastic caps from the upper left hinge corner. Install the upper left hinge by
fastening the screws through the left hinge to the cabinet. Insert the plastic caps
to the upper right hinge.
5. Remove the door axis and bushing from the lower right hinge. Install the door
axis and bushing on the lower left hinge.
6. Carefully insert the door into the upper left hinge, then slide the door on top of
the lower hinge and secure the door by installing the lower screws.
14